Really Good Bong | Tall Fat Collection
143mm fat base, 105mm tall beaker. Maximum water capacity. Absolute rager. Try out the config selector to render each design, it's sick.
What You Get
This is the Tall Fat pack | 143mm fat base with 105mm tall beaker taper. This is a big bong. Longer downstem length combined with maximum water capacity makes this piece an absolute rager.
The neck length might not even be needed. If it fits how you might wanna roll, just rip it straight from the pipe without building anything in the neck | the research team found the 280mm model especially to be an absolute monster for this configuration. You basically become the neck for maximum degeneracy with the device.
Without taking anything away from the longer models that offer a much more conventional large bong experience (and might even fit most user preferences better), for the absolute animals among you, just know that we have you covered at Hashishigh Designs.
The collection includes 12 complete bong designs spanning three heights (280mm, 340mm, 400mm) with smooth and ribbed neck textures, each with carb and no-carb variants. The tall beaker allows carb placement on the beaker wall (not the neck) for ergonomic reach. Joint is positioned 11mm higher than short beaker variants.
Plus 12 matching downstems | recommended stems for each height in 14mm and 18mm variants, with diffuser and plain options. Extra pipe lengths include 100mm, 110mm, and 120mm (for those who want it literally touching the bottom).
Technical Specifications
| Base Diameter | 143mm (fat profile) |
| Beaker Height | 105mm (tall taper) |
| Total Heights | 280mm | 340mm | 400mm |
| Neck Diameter | 50mm (280mm) | 51mm (340mm, 400mm) |
| Joint Size | 18.8mm female (standard ground taper) |
| Joint Position | 11mm higher than short beaker variants |
| Carb Placement | 10mm below beaker/neck junction (on beaker section) |
| Carb Size | 10mm diameter |
| Wall Thickness | 3mm structural |
| Files Included | 12 bongs + 12 downstems (24 STL files) |
Print Settings
Tested extensively on Bambu Lab H2S with PETG and ABS. These settings work reliably:
- Material: PETG recommended (heavily tested for quality assurance)
- Layer Height: 0.24mm
- Nozzle: 0.4mm (0.42mm line width)
- Infill: 15% standard (can go as low as 5%)
- Walls: 2 loops minimum, 3 recommended for beaker section
- Supports: Not required
- Print Time: 9-13 hours per bong depending on height
Critical Setting | Solid Base
First 25 layers (for 0.24mm layer height) should be 100% infill. This ensures watertight seal for years, prevents leaks at high-pressure beaker base, and ensures print stability.
Glass Compatibility
The bong is designed to fit standard 18.8mm glass downstems. Printed downstems fit glass bases. Standard 18.8mm ground glass taper throughout.
Get This Collection
Choose your platform. Same files, same quality.